Such adapters are relatively inexpensive, and it is possible to find USB 3.0 and higher options. Its USB side is plugged into the computer’s USB port, and the SATA side is attached to the drive. The communication between these two interfaces can be achieved via a special USB to SATA adapter. What should be prepared for the procedure? Any of these obstacles can be easily avoided by turning this SATA drive into an external device plugged into a USB port instead of the motherboard. This method is also not viable for laptops, as they are slightly more difficult to disassemble compared to desktops and have physical space constrains. The computer may also be short of available SATA ports, since a typical motherboard can host about 4-6 of them. However, one may not want to open its tower because of the warranty. Yet, in some situations, the drives should be taken out of the computer, for example, due to a serious risk to overwrite the lost files, severe OS crash, faulty hardware or other technical limitations.Īdmittedly, when removed from the original device, a SATA hard drive can be likewise relocated to an internal SATA slot of another computer. Thus, it is generally preferred for data recovery as well. This kind of setup is optimal and provides the highest transfer rates. The first "data" cable plugs the storage medium into the motherboard, while the second "power" cable – into the system’s power supply unit. It is represented by a smaller L-shaped connector with a flat thin cable that serves for data transmission and a slightly wider L-shaped connector used to power the drive via a 5-wire cord. SATA remains the most common connection standard for internal hard drives found in desktop computers, laptops, servers, and some other devices. When is it required to connect a SATA drive via an adapter? Connecting SATA drives via a USB to SATA/IDE adapter step by step.What should be prepared for the procedure?.When is it required to connect a SATA drive via an adapter?.
0 Comments
Leave a Reply. |